MP-AC1-R2 - 2nd gen - bioVibez PIR/LUX motion sensor/detector
  Copy   Facebook   WhatsApp   Twitter   Email

AC/DC - 90V to 230V | Dual channel | DIP switch config
35 to 250V AC/DC

₹1,499.00/- ₹2,499.00
(inclusive of TAX)

Availability: In stock
SKU: MP-AC1-R2- 2nd gen
  • Flexible supply - AC/DC – 90V to 230V
  • Unique – dual channel output
  • Automatically detect human presence due to motion
  • Operate lights with LUX control (motion + failing ambient light)
  • Operate non-lighting devices like fans / exhaust - with LUX control on channel disabled
  • Configure channel parameters using DIP switches
  • Independent parameter control for both channels
    • Channel timeouts - 8 discrete values from 10 seconds to 30 minutes
    • Channel-2 start mode control - Parallel (ch-2 output switches "ON" with motion detection) or sequential (ch-2 switches "ON" after ch-1 timeout)
    • LUX enable / disable - Ambient light detection control
  • Common channel parameters
    • PIR sensor sensitivity - 4 presets
    • LUX set point - 2 preset levels
  • Micro-controlled motherboard
  • Dynamic set point - prevents hunting
  • SMPS powered - Low standby current
  • Type-A outputs - Channel outputs tied to supply internally
  • Polycarbonate enclosure - Durable & elegant
  • Versatile mounting (Wall / ceiling mounted)
  • Easy installation & configuration
  • Designed, developed and Made in India
Check Delivery
Enter pincode for exact delivery charges
Shipping: ₹Free
buy now
description

bioVibez MP-AC1-R2-Gen2 - Motion sensor / detector automatic switch is a dual output / channel micro-controlled PIR (Pyroelectric Infrared or Passive Infrared) sensor with 2 user configurable relay outputs. The sensor can be configured using DIP switches.

Microcontroller based - A microcontroller-based design gives more precise timeouts and digital control.

Independent precise channel timeouts (8-presets) - Precise discrete relay timeouts for each channel can be set for each output using DIP switches.

CH-2 start mode - The outputs can be configured to be triggered together (parallel mode) or in sequence (sequential mode) with motion detection. In sequential mode CH-2 output does not switch "ON" with motion detection. It switches "ON" after CH-1 times out. Any motion detection while CH-2 is switched "ON" will reset CH-1 timeout and outputs. (CH-1 "ON" & CH-2 "OFF")

LUX set point (2 levels) - Common LUX set point (ambient light) setting.

Independent LUX control - Both channel outputs can be separately enabled / disabled for ambient light sensing. De-activating LUX control allows the output to be used for non-lighting applications such as operating exhaust fans which need to be operated irrespective of the ambient light conditions.

PIR sensitivity (4 levels) – The sensors motion detection sensitivity can be adjusted.

SMPS - for standby power savings. The module is powered by a built in universal SMPS (switched mode power supply).

Why dual outputs? - Practical application like a toilet/bathroom, where lights need to be controlled with both motion and ambient light. But, at the same time exhaust fan which should be controlled with motion only. Dual outputs make it an ideal choice for using in toilets / urinals / bathrooms where one channel (PIR + LUX control enabled) controls the light/lights and second channel (PIR) operates the exhaust fan. When there is proper ambient lighting, the lights will remain "OFF" but the exhaust will switch "ON". This cannot be accomplished using a single channel output.

Dynamic set lux point - Dynamic set point is captured after a delay, once channel relay switches "ON". The dynamic set point includes the new ambient lux value of the light attached to the outputs. This prevents hunting or race condition.

Ceiling or wall mounted - The sensor has a universal mounting design which allows for wall and ceiling mounted.

Polycarbonate enclosure - Fire retardant grade polycarbonate enclosure ensures safety and rigidity. Polycarbonate is more durable than ABS, as it does not degrade or change colour with exposure to sunlight.

technical specification
Supply
  • AC voltage 90 to 250 V (AC)
  • DC voltage 85 to 300 V (DC)
Output configuration
  • Channel - 1 Type - A*
  • Channel - 2 Type - A*
Notes
  • *Channel outputs are tied to supply, through relays
Power output (Maximum)
  • Channel - 1 2000W †
  • Channel - 2 2000W †
  • Channel - 1 + Channel - 2 <= 2300W †
Notes
  • † Rated at resistive load
Fuse - External (for channel load)
  • Recommended as per load
Sensor detection
  • Detection range ~6m (13ft)
  • Angle of detection ~120 degrees
  • Motion detection speed 0.5 to 0.9m/s
Device configuration
  • Method DIP-switches x 12
Configurable parameters CH - 1 & CH - 2
  • Channel timouts 8 preset values
  • Value list : 10sec, 20sec, 30sec, 60sec (1min), 2min, 5min, 10min, 30min
  • LUX control Enable / disable
  • LUX set points 2 preset values
  • Dark to dim setting < 10 lux
  • Medium setting < 70 lux
  • Ch-2 start control Parallel / Sequential
  • Parallel mode CH-2 output switches ‘ON’ with motion detection.
  • Sequential mode CH-2 output switches ‘ON’ after CH-1 output timeout (’OFF’)
  • PIR sensor sensitivity 4 settings
  • Value list : 100 % (default), 85%, 75% & 60%
Dimensions
MP-AC1-R2 2nd gen Dimensions
  • Length 115 mm
  • Width 60 mm
  • Height 59.2 mm
Weight
  • Unit weight 180 gm
  • Packaged weight 240 gm
Enclosure
  • Material Polycarbonate
  • Grade Fire resistant
Recommended usage
  • Device installation Indoors
Recommended mounting
  • Device mounting Wall or ceiling
Dynamic lux set point calibration
  • Dynamic SP delay # 1 sec
Notes
  • # Dynamic set point is captured after delay, once relay is ‘ON’. The dynamic set point includes the lux value of the light attached to the relay. This prevents hunting.
Connections (colour coded wires)-
MP-AC1-R2 2nd gen Connections
Applications
Installation Guide
INSTALLATION LOCATION
Factors that help in fixing location
  • Entry / exit points – for best motion detection
  • Detection area of Motion sensor – Make sure detection area is covered within 120 degrees of sensor detection angle. (See fig.1)
  • Detection range should be kept less than 6 meters. (See fig.1)
  • If LUX (light) detection is enabled – sensor should be mounted away from lights.
  • Wall mounted or ceiling mounted should be decided as per entry/exit, optimum wiring and aesthetics
MP-AC1-R2 2nd gen sensors
Figure 1 – Motion sensor range & detection angle
BACKPLATE MOUNTING FIXING
  • The backplate can be mounted as fixed or removable sliding mounts.
  • Fixed mounting holes – Use hole guide A1 & A2 (see figure 3)
  • Removable slide holes – Use hole guide B1 & B2 (see figure 3)
MP-AC1-R2 2nd gen sensors
Figure 2 – Backplate

MP-AC1-R2 2nd gen sensors
Figure 3 – Mounting drill guide
WIRING CHANNEL OUTPUTS:
  • MP-AC1-R2-Gen2 relay outputs are type-A (tied to input supply) (see figure 4)
  • Devices can be connected directly to output channels using OUTx & N (neutral) terminals (see figure 5)
  • Neutral can be source with external sources too.
  • Channel loads should not within the limits. (See product technical specifications datasheet)
MP-AC1-R2 2nd gen sensors
Figure 4 – Output relay config & connections

MP-AC1-R2 2nd gen sensors
Figure 5 – Supply & channel output terminals
Config
biovibez motion and light sensor configs
1 CH-1 timeout delay preset setting
This setting decides any 1 out of 8 CH-1 timeout interval
biovibez motion and light sensor config step 1
Sr. No DIP 1 Timeout interval
Switch-1 Switch-2 Switch-3
1 OFF OFF OFF 10 seconds
2 OFF OFF ON 20 seconds
3 OFF ON OFF 30 seconds
4 OFF ON ON 60 seconds
5 ON OFF OFF 2 minutes
6 ON OFF ON 5 minutes
7 ON ON OFF 10 minutes
8 ON ON ON 30 minutes
2 CH-2 start mode setting
This setting decides the starting behaviour of CH-2
biovibez motion and light sensor config step 2
Sr. No DIP 1 CH-2 start mode
Switch-4
1 OFF Parallel mode (CH-1 & CH-2 outputs switch ‘ON’ with motion detection)
2 ON Sequential mode (CH-2 output switches ‘ON’ after CH-1 times out)
Notes
  • For sequential mode if there is motion detection while CH-2 is ‘ON’, it will reset to CH-1 switching ‘ON’ & CH-2 ‘OFF’
3 CH-2 timeout delay preset setting
This setting decides any 1 out of 8 CH-2 timeout interval
biovibez motion and light sensor config step 3
Sr. No DIP 2 Timeout interval
Switch-1 Switch-2 Switch-3
1 OFF OFF OFF 10 seconds
2 OFF OFF ON 20 seconds
3 OFF ON OFF 30 seconds
4 OFF ON ON 60 seconds
5 ON OFF OFF 2 minutes
6 ON OFF ON 5 minutes
7 ON ON OFF 10 minutes
8 ON ON ON 30 minutes
4 PIR sensor sensitivity setting
The sensitivity setting sets the range / sensing distance for both CH-1 & CH-2
biovibez motion and light sensor config step 4
Sr. No DIP 3 CH-2 start mode
Switch-1 Switch-2 % Sensitivity
1 OFF OFF 60% LOW
2 OFF ON 75% Medium-LOW
3 ON OFF 85% Medium-High
4 ON ON 100% Highest
5 LUX set point (SP) - Ambient light detection mode
This sets the LUX (ambient light) set point preset for both CH-1 & CH-2
biovibez motion and light sensor config step 5
Sr. No DIP 2 CH-1 & CH-2 LUX set point
Switch-4 LUX SP Output behaviour
1 OFF Dark to dim CH-1 &/or CH-2 will operate only if ambient lighting is less than dark to dim range
2 ON Medium CH-1 &/or CH-2 will operate only if ambient lighting is less than medium range
Notes
  • LUX enable CH-1 (SW-3 of DIP3) & LUX enable CH-2 (SW-4 of DIP3) need to be set too.
6 CH-1 LUX / ambient light detection set
This enables / disables LUX (ambient light) detection for CH-1
biovibez motion and light sensor config step 6
Sr. No DIP 3 CH-1 LUX / ambient light
Switch-3 LUX Output behaviour
1 OFF Disabled CH-1 will operate with motion only
2 ON Enabled CH-1 will operate only if ambient light is less than LUX set point
Notes
  • LUX SP (set point) as per setting 5.
7 CH-2 LUX / ambient light detection set
This enables / disables LUX (ambient light) detection for CH-2
biovibez motion and light sensor config step 7
Sr. No DIP 3 CH-2 LUX / ambient light
Switch-4 LUX Output behaviour
1 OFF Disabled CH-2 will operate with motion only
2 ON Enabled CH-2 will operate only if ambient light is less than LUX set point
Notes
  • LUX SP (set point) as per setting 5.
Frequently Asked Questions
General FAQ's
Motion sensors detect movement of objects and people. There are different types of motion sensors based on the detection object and detection methods. 2 types of motion sensors / detectors that are widely used to detect the presence/absence of people are PIR and microwave motion sensors.
Motion sensors/PIR sensors detect presence of a person by detecting the persons movement within the detection zone. With the help of control logic and relay mechanism lights and appliances can be switched "ON" or "OFF" when detection occurs. In other words, lights come on only when a person is present in the effective area – like a toilet / bathroom. This saves energy, as when the person leaves the lights are switched "OFF" automatically.
Motion sensors/PIR sensors get activated on sensing human presence based on motion or thermal radiation in case of PIR sensors. This when coupled with control circuitry and actuation mechanism like a relay – lights and appliances can be controlled and switched "ON" or "OFF" only when the person is in the area of detection. This give a dual benefit of (a) automation, (b) energy / power savings, (c) Ensure senior citizens safety by ensuring they do not have to reach out to a light switch.
Occupancy sensors detects the continuous presence of a person/persons within the detection zone. Occupancy sensors are based on thermal radiation or ultrasound or visual image processing or CO / CO2 monitoring, people counting (going in vs going out), etc. They may also employ a combination of two or more detection methods.
Occupancy sensors detects the continuous presence of a person/persons within the detection zone. If nobody is detected in the room (detection zone) control circuitry can will switch ‘OFF’ all lights, devices, air conditioner, fans, and other connected appliances. This saves a lot of energy and shaves down electricity bills.
Motion sensors as the name suggest detect motion within the field of view in case of PIR. If there is no motion, there is no detection. For example, it cannot detect a sleeping person as there will be not movement. Occupancy sensors on the other hand detects the continuous presence of a person/persons within the detection zone. As such motion detection sensors are useful for short duration application which involve intermittent (in seconds) motion detection, like in toilets or bathrooms, pathways, hotel or building corridors. Occupancy sensors are more suited for long duration (in hours) like bedrooms, living rooms, office cubicles, hotel rooms, etc.
No. Motion sensors as the name suggest detect motion within the field of view in case of PIR. If motion is not detected, the control circuitry will switch ‘OFF’ lights and appliances after the programmed timeout.
Some cheap occupancy sensors employ this method. But they are not true occupancy sensors. The higher timeout will keep lights and appliance ‘ON’ for the full timeout even if the room is empty wasting energy. Also, if there is no movement during the entire timeout as in case of a person sleeping, the control circuitry will switch of fans / air conditioner making the person get up in a sweat.
Passive Infra-Red (PIR) sensors use a pair of pyroelectric elements (or quad elements for higher sensitivity) to detect heat energy in the surrounding environment. These two sensors sit beside each other, and when the signal differential between the two sensors changes for example when a person enters the room, the sensor will trigger a detection signal.
Whenever the PIR motion sensor detects movement, it triggers the control circuitry which in turn actuates a relay or contactor switching on the connected light or appliance. Once the person leaves the detection area and no more motion is detected - a timeout is triggered. When timeout occurs, the control circuit disengages the relay and lights switch "OFF" (for example 10sec after last motion detection – lights will switch "OFF")
PIR motion sensor works on movement detection. It is not possible for a person to be moving continuously. The timeout works as a time buffer between movement detection. For example, if a timeout of 10 seconds is used, the person has the allowance of 10 seconds to be motion less. If motion is detected within the 10 seconds timeout is reset to 10 seconds and the cycle continues until no movement is detected within the timeout, in which case the control circuitry disengages the relay and switches ‘OFF’ the connected lights and appliances.
Timeouts are application specific and they depend on the estimation of how long a person in the detection zone will stay still or not move. It may need a little trial and error to get the optimum timeout. For example, if the PIR switch is used in an elevator. The timeout should be set considering the maximum time it takes for going from bottom to top. That is the maximum time the person can remain still.
In case a timeout occurs due to no movement and relays are disengaged, the person on realizing the lights or exhaust fan are "OFF" will most probably do some movement and the PIR sensor will detect the motion restarting the lights.
bioVibez motion sensor switch is just not only meant to control lights but also other appliances like exhaust fans in case of toilets. Lights need to be controlled with motion and also the ambient light. If there is enough daylight the LUX sensor on bioVibez will disengage the channel relay on which LUX sensing is enabled and keep lights "OFF" even when there is motion. But in case of exhaust fan its use not dependent on the amount of ambient light and needs to be on a separate channel with LUX sensing disabled.
Refer the model specific setup manual to set the ‘DIP switches’ for the timeout delay required. For WiFi config models timeouts can be set using a phone or PC. Refer to device specific manual for more details.
Refer the model specific setup manual to set the ‘DIP switches’ for enabling/disabling LUX sensing for a channel. For WiFi config models LUX sensing can be enabled/disabled using a phone or PC. Refer to device specific manual for more details.
2nd Gen - bioVibez PIR/LUX sensor onwards and WiFi config have this feature. Refer the model specific setup manual to set the ‘DIP switches’ for enabling/disabling PIR motion sensing on a channel. For WiFi config models PIR motion sensing can be enabled/disabled using a phone or PC. Refer to device specific manual for more details.
Refer the model specific setup manual to set the ‘DIP switches’ for setting LUX levels. Note this setting applies for both channels.
For WiFi config models LUX level can be set for both channels independently using a phone or PC. Refer to device specific manual for more details.
Yes, outputs of more than one bioVibez PIR/LUX sensor can be connected in parallel. Care has to be taken to make sure the phase and neutral wires match. For example for a multi entry/exit point corridor or lobby where it is not possible to cover all entry points with a single sensor, bioVibez PIR/LUX sensors can be installed at each entry/exit and outputs drawn parallel to a common light.
Yes, one of the channel outputs can be connected to a standalone alarm/hooter. LUX sensing should be disabled. The setup will need to be armed and disarmed manually.
There is delay of ~2 seconds from first detection to channel output activation.
PIR sensors detect movement on basis infra-red radiation difference between its pyroelectric elements. A false detection can happen if the sensor is placed directly in front of an air conditioner or too close to a fan. The flowing air can register different temperatures on the pyroelectric elements causing false detection. The sensor should be placed away from any possible strong draft of air.
The channel-2/relay-2 modes set the operation behaviour for channel-2. If parallel mode (default) is selected both channel-1 and channel-2 outputs are triggered together on PIR detection. For sequential mode – channel-2 output is triggered after channel-1 timeout. Sequential mode is useful where channel-2 should not be triggered during the time the person is in detection zone, but after channel-1 times out. Refer to device manual for more details.
The motion detection angle is around 120 degrees. The range is ~4m (~13ft)
All bioVibez product come with a 1-year warranty from the date of purchase, unless mentioned otherwise. (See the product manual for more information)
bioVibez product warranty covers against any electrical/electronic/manufacturing defect. (See the product manual for more information)
Please take the bioVibez product to the authorised dealer from where it was purchased along with the bill/invoice and it will be replaced immediately if damaged and in stock. In case it was an online purchase, please contact customer care.
Please refer bioVibez product manual.
Downloads
Safe Shopping
Pan India Free Shipping
Inclusive Pricing
Trusted Products
If you have any questions or need help, feel free to conect with our team.
+91 22 2508 4040
our product
Motion Sensor
Light Sensor
(Dusk to Dawn)
Wardrobe / Door Sensors
Support
For Business
Legal
Other Solutions
  • carcat.in for 24/7 protection of cars from rats
  • gizmocat.in for 24/7 protection of industrial control panels/machine panel from rats
Website designed and developed by cuttheklutter.com